PremiCote 1500 BC
Premicote 1500 is a plasticizer free 100% acrylic, single component, water based, high performance elastomeric coating for spray, brush, or roller application.
Recommended Uses:
This product is intended for use as a universal roofing and wall coating. It has excellent adhesion to many substrates including polyurethane foam, concrete, masonry, primed metal and primed or unprimed wood. When used with a suitable base coat it is an exceptional protective coating for most single ply roofing membranes. Contact Premium Spray Products for specific application information.
Product Limitations:
This acrylic coating is water based and must be stored and used to prevent from freezing at 32°F (0°C). Do not apply when inclement weather is imminent. Curing is necessary prior to precipitation to avoid washing off the coating or affecting adhesion or physical properties. Do not apply if temperature will drop below 50°F (10°C) within 1-2 hours. The acrylic coatings stop curing below 50°F. Do not apply when the relative humidity is in excess of 85%. Avoid applying late in the day when conditions for dew and condensation are imminent. Material is not intended for ponded water applications. Applications where there is a risk of vapor drive, such as cold storage and refrigerated tank applications should only be made in conjunction with a suitable vapor barrier. This material is not intended for use as a thermal barrier.
Ponding Water:
Warranties do not cover damage due to ponding water. The National Roofing Contractors Association considers ponding water on any roof unacceptable. (See the NRCA Roofing and Waterproofing Manual). For additional assistance please contact the Premium Spray Products Technical Services dept. of Accella Polyurethane Systems, LLC. at (770) 528-9556.
| STANDARD COLORS / PACKAGING | ||
|---|---|---|
| PREMICOTE 1500 BC - BASE COAT Base coat formulation is available. Provides excellent adhesion and recoatability. |
AVAILABLE COLORS Gray, Ivory |
PREMICOTE 1500 TC - TOP COAT | AVAILABLE COLORS White, Light Gray, Tan |
| PRODUCT PACKAGING | AVAILABLE IN 5 Gallon Pails 55 Gallon Drums | |
Typical Physical Properties
| PROPERTY | PREMICOTE 1500 | TEST | |
|---|---|---|---|
| TENSILE STRENGTH | 475 psi ± 25 | ASTM D 2370 | |
| ELONGATION | 580% ± 25 | ASTM D 2370 | |
| PERMS | 12 | ASTM D 1653 | |
| SOLIDS (BY VOLUME) | 55% ± 2 | ASTM D 2697 | |
| SOLIDS (BY WEIGHT) | 65% ± 2 | ASTM D 1644 | |
| DENSITY | 11.1 lbs / Gallon | ASTM D 1475 | |
| VOC | < 50 grams/liter | Method 24 | |
| FLASH POINT | > 212°F | ASTM D 1310 | |
| TEAR RESISTANCE | 130 lbs / ft | ASTM D 624 | |
| FLEX | Low temp Flexibility over ½ Mandrel @ -15°F (-26°C) | Passes 180° ASTM D 522 |
|
| CURE TIME | 24 Hours depending upon temp. & humidity | ||
| DRY TIME/RECOAT TIME | 4 Hrs. at 75°F (50% RH) | ||
| SHELF LIFE | 12 months in properly sealed containers | ||
| SOLAR REFLECTIVITY | 0.87 | ASTM C 1549 | |
| EMISSIVITY | 0.90 | ASTM C 1371 | |
| SRI | 110 | ASTM E 1960 | |
| TEMPERATURE LIMIT | 0°F to 185°F | ||
| UL LISTING | This product has achieved a UL Class A rating over a UL noncombustible deck and a Class B rating over a combustible deck when tested in accordance with UL 790. | ||
| ASTM D 6083 | Passes requirements of ASTM D 6083 Standar d for Acrylic Coatings | ||